NSN 3040-00-602-8727 · NIIN 006028727 · FSC 3040
NO DASHES 3040006028727
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ATPC | STEP QUANTITY | 9 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.6000 |
| BDSR | SECOND END SPLINE QUANTITY | 12 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.250 |
| MATT | MATERIAL | STEEL UNS K24065 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 0.470 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES NOMINAL 0.3125 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.4030 AND INCHES MAXIMUM 0.4060 |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.6310 AND INCHES MAXIMUM 0.6360 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.4030 AND INCHES MAXIMUM 0.4060 |
| BDSQ | FIRST END SPLINE QUANTITY | 12 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 0.480 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 0.5000 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.6310 AND INCHES MAXIMUM 0.6360 |
| AAHP | SECOND END STYLE | |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 0.3750 |
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6709 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 6.850 |