NSN 3040-00-607-2533 · NIIN 006072533 · FSC 3040
NO DASHES 3040006072533
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 2.500 |
| AKAF | SHAFT THREAD DIRECTION | FIRST END FIFTH PORTION RIGHT-HAND |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 3.188 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END THIRD PORTION INCHES MINIMUM 1.180 AND INCHES MAXIMUM 1.181 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FIRST PORTION INCHES NOMINAL 1.750 |
| AKAF | SHAFT THREAD DIRECTION | SECOND END FIFTH PORTION RIGHT-HAND |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SECOND PORTION INCHES NOMINAL 1.406 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SIXTH PORTION INCHES MINIMUM 0.873 AND INCHES MAXIMUM 0.874 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END THIRD PORTION INCHES MINIMUM 1.180 AND INCHES MAXIMUM 1.181 |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | SECOND END SIXTH PORTION INCHES NOMINAL 0.2480 |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | SECOND END SIXTH PORTION INCHES NOMINAL 0.245 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST- A400, CLASS Q2 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END SECOND PORTION INCHES NOMINAL 1.239 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END THIRD PORTION INCHES NOMINAL 0.593 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FIRST PORTION INCHES NOMINAL 1.750 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FOURTH PORTION INCHES NOMINAL 1.094 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END FIFTH PORTION UNS |
| CFFF | WORM PRESSURE ANGLE IN DEG | 14.500 |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.625 |
| CFFD | WORM THREAD DIRECTION | LEFT-HAND |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | FIRST END FIFTH PORTION INCHES NOMINAL 0.375 |
| ABRV | KEYWAY DEPTH | FIRST END FIFTH PORTION INCHES NOMINAL 0.094 |
| ABRV | KEYWAY DEPTH | SECOND END FIFTH PORTION INCHES NOMINAL 0.094 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END FIFTH PORTION UNS |
| CFFG | WORM HELIX ANGLE | 4 DEG 32 MIN 59.3 SEC |
| CFFK | WORM OUTSIDE DIAMETER | INCHES MINIMUM 2.895 AND INCHES MAXIMUM 2.897 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 10.188 |
| ABRR | KEYWAY WIDTH | FIRST END FIFTH PORTION INCHES NOMINAL 0.188 |
| ABRR | KEYWAY WIDTH | SECOND END FIFTH PORTION INCHES NOMINAL 0.188 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END SECOND PORTION INCHES NOMINAL 1.417 |
| AASA | THREAD LENGTH | SECOND END FIFTH PORTION INCHES NOMINAL 0.375 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8419008 | 19204 |