NSN 3040-00-608-8792 · NIIN 006088792 · FSC 3040
NO DASHES 3040006088792
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 0.4375 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.9800 |
| ATPC | STEP QUANTITY | 8 |
| BDSQ | FIRST END SPLINE QUANTITY | 36 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.898 AND INCHES MAXIMUM 0.900 |
| AMDM | FIRST END SPLINE LENGTH | INCHES MINIMUM 0.7400 AND INCHES MAXIMUM 0.7600 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.3400 AND INCHES MAXIMUM 0.3500 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| AAHP | SECOND END STYLE | |
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | INCHES NOMINAL 0.7000 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES MINIMUM 0.3520 AND INCHES MAXIMUM 0.3620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 11.570 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.3730 AND INCHES MAXIMUM 0.3740 |
| AAHW | SECOND END GROOVE WIDTH | INCHES MINIMUM 0.1200 AND INCHES MAXIMUM 0.1400 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.3730 AND INCHES MAXIMUM 0.3740 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 003407684 · 006303952. An older drawing citing one of those numbers resolves here.