NSN 3040-00-613-9096 · NIIN 006139096 · FSC 3040
NO DASHES 3040006139096
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SIXTH PORTION INCHES NOMINAL 0.4372 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FIRST PORTION INCHES NOMINAL 0.625 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END THIRD PORTION INCHES NOMINAL 0.9375 |
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 1.020 |
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 0.861 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 6.410 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END EIGHTH PORTION UNF |
| AKAF | SHAFT THREAD DIRECTION | SECOND END EIGHTH PORTION RIGHT-HAND |
| BYFR | TEETH HARDNESS RATING | ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 35.0 |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.250 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FOURTH PORTION INCHES NOMINAL 0.500 |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | SECOND END SIXTH PORTION INCHES NOMINAL 0.1245 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 29.000 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END SECOND PORTION INCHES NOMINAL 0.4372 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FIFTH PORTION INCHES NOMINAL 0.433 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FOURTH PORTION INCHES NOMINAL 0.520 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END SECOND PORTION INCHES NOMINAL 0.438 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END SEVENTH PORTION INCHES NOMINAL 0.290 |
| CFFG | WORM HELIX ANGLE | 5 DEG 17 MIN |
| CFFN | WORM THREAD SECTION LENGTH | INCHES NOMINAL 1.313 |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 1.375 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 0.350 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END SECOND PORTION INCHES NOMINAL 0.875 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FIFTH PORTION INCHES NOMINAL 0.047 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FIRST PORTION INCHES NOMINAL 0.712 |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | SECOND END SIXTH PORTION INCHES NOMINAL 0.0772 |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END SIXTH PORTION INCHES NOMINAL 1.043 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END THIRD PORTION INCHES NOMINAL 0.760 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FIRST PORTION INCHES NOMINAL 0.460 |
| CFFM | SHAFT HARDNESS RATING | LOCATION NOT OTHERWISE SPECIFIED ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 35.0 |
| ZZZV | FSC APPLICATION DATA | MOUNT,TELESCOPE,ANTIAIRCRAFT FIRE CONTROL EQUIPMENT |
| AASA | THREAD LENGTH | SECOND END EIGHTH PORTION INCHES NOMINAL 0.290 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SECOND PORTION INCHES NOMINAL 0.450 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SEVENTH PORTION INCHES NOMINAL 0.312 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6139096 | 19200 |