NSN 3040-00-629-0362 · NIIN 006290362 · FSC 3040
NO DASHES 3040006290362
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFGJ | INVOLUTE SPLINE QUANTITY | 12 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 0.200 AND INCHES NOMINAL 0.660 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FIRST PORTION INCHES NOMINAL 0.249 AND INCHES NOMINAL 0.320 |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 0.620 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFM | SHAFT HARDNESS RATING | LOCATION NOT OTHERWISE SPECIFIED ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 34.0 |
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 0.516 |
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 0.438 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.267 |
| CFFD | WORM THREAD DIRECTION | LEFT-HAND |
| AGJR | MINOR DIAMETER | SPLINE FIRST END SECOND PORTION INCHES NOMINAL 0.192 |
| AGJR | MINOR DIAMETER | SPLINE SECOND END FIRST PORTION INCHES NOMINAL 0.192 |
| BYFR | TEETH HARDNESS RATING | ROCKWELL C MINIMUM 48.0 AND ROCKWELL C MAXIMUM 55.0 |
| CFFB | WORM THREAD QUANTITY | 5 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.380 |
| MATT | MATERIAL | STEEL |
| CFGK | INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 14.5 |
| CFGL | INVOLUTE SPLINE PITCH DIAMETER | SECOND END EIGHTH PORTION INCHES NOMINAL 0.2500 |
| CFGM | INVOLUTE SPLINE LENGTH | SECOND END FIRST PORTION INCHES NOMINAL 0.260 |
| CFFF | WORM PRESSURE ANGLE IN DEG | 20.000 |