NSN 3040-00-715-8306 · NIIN 007158306 · FSC 3040
NO DASHES 3040007158306
In Stock
GEARSHAFT,SPUR
Miscellaneous Power Transmission Equipment
Application: GRUMMAN AIRCRFT MODEL A10
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 10.422 AND INCHES MAXIMUM 10.516 |
| CYET | SHAFT LARGEST DIAMETER | INCHES NOMINAL 1.250 |
| CYEQ | SHAFT MATERIAL | STEEL |
| CYER | GEAR MATERIAL | STEEL |
| AQPL | FACE WIDTH | INCHES NOMINAL 0.375 |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AGAV | END ITEM IDENTIFICATION | GRUMMAN AIRCRFT MODEL A10 |
| AJLA | TEETH QUANTITY | 14 |
| AJWS | GEAR OUTSIDE DIAMETER | INCHES NOMINAL 0.965 |
| ANJS | SHAFT END TYPE | CROSS DRILLED UNTHREADED AND THREADED EXTERNAL |
| AQGH | DIAMETRAL PITCH | 16 |
| FEAT | SPECIAL FEATURES | THREADED END IS ALSO SQUARE |
| CYEV | LONGER SHAFT SEGMENT LENGTH | INCHES NOMINAL 10.094 |
| CYEW | SHAFT END SIZE | INCHES 0.667 AND INCHES 0.438 |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 52A226D10-2 | 30003 |
| 10705 | 79805 |
| 52A226D10-2 | 79805 |
| 52A226D10-2 | 07912 |
| 52A226D10-2 | 10001 |
| 52A226D10 | 10001 |
Supersedes
This item replaces cancelled NIIN 007976284. An older drawing citing one of those numbers resolves here.