NSN 3040-00-741-4259 · NIIN 007414259 · FSC 3040
NO DASHES 3040007414259
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 1.5750 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 2.583 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES NOMINAL 1.5469 |
| AAGZ | FIRST END STYLE | |
| MATT | MATERIAL | STEEL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| BDSR | SECOND END SPLINE QUANTITY | 10 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.850 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 8.000 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 1.5752 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 1.3190 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE 8620H OR ASSN STD SINGLE MATERIAL RESPONSE SAE 8720 |
| ZZZV | FSC APPLICATION DATA | INPUT,POWER DIVIDER,WINCH DRIVE,TRUCK 5 TON 6X6 |
| AAHP | SECOND END STYLE | |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 1.5750 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.819 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | CENTER EXTERNAL INVOLUTE SPLINE 14 TEETH,30 DEG PRESSURE ANGLE,1.750 IN. PITCH DIA;3/8-24UNF-2B THREAD ONE PLACE |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES NOMINAL 1.000 |
| ATPC | STEP QUANTITY | 4 |
| AAHW | SECOND END GROOVE WIDTH | INCHES NOMINAL 0.0625 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005931802. An older drawing citing one of those numbers resolves here.