NSN 3040-00-741-4261 · NIIN 007414261 · FSC 3040
NO DASHES 3040007414261
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHP | SECOND END STYLE | |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 1.849 AND INCHES MAXIMUM 1.852 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 9.000 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABKZ | EXTERNAL KEYWAY LENGTH | SECOND END INCHES NOMINAL 1.250 |
| AKTM | FIRST END SLOT WIDTH | INCHES NOMINAL 0.188 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 1.2490 AND INCHES MAXIMUM 1.2500 |
| AMDW | FIRST END SLOT DEPTH | INCHES NOMINAL 0.297 |
| AMFJ | SECOND END DISTANCE FROM END TO FLAT | INCHES NOMINAL 0.344 |
| AMJB | SECOND END GROOVED FLAT DEPTH | INCHES NOMINAL 0.063 |
| MATT | MATERIAL | STEEL COMP 8620H |
| ATPC | STEP QUANTITY | 5 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 1.2490 AND INCHES MAXIMUM 1.2500 |
| AMJA | SECOND END GROOVED FLAT LENGTH | INCHES NOMINAL 0.3750 |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | INCHES NOMINAL 0.750 |
| AAGZ | FIRST END STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| AMFR | SECOND END KEYWAY WIDTH | INCHES MINIMUM 0.2487 AND INCHES MAXIMUM 0.2505 |
| FEAT | SPECIAL FEATURES | FIRST END PARTIAL BORE,0.344 IN. DIA,1.125 IN. DP;FIRST END C'BORE,0.374/0.375 IN. DIA,1.000 IN. DP;SPLINES ON LARGEST OD,14 TEETH,8/16 DP,30 DEG PRESSURE ANGLE,1.750 PD |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005931808. An older drawing citing one of those numbers resolves here.