NSN 3040-00-741-4263 · NIIN 007414263 · FSC 3040
NO DASHES 3040007414263
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHG | FIRST END GROOVE WIDTH | INCHES NOMINAL 0.0156 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.615 |
| CSYM | SURFACE FINISH | MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | CENTER STEP HAS INVOLUTE SPLINES 4.485 IN. LG,30 DEG PRESSURE ANGLE,1.750 IN. PITCH DIA |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE 8620H OR 8720H SECIAL QUALITY |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 1.5750 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES NOMINAL 1.188 |
| ATPC | STEP QUANTITY | 4 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.813 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 1.3190 |
| AAHH | FIRST END GROOVE DIAMETER | INCHES NOMINAL 1.5469 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| AAHW | SECOND END GROOVE WIDTH | INCHES NOMINAL 0.0156 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES NOMINAL 1.5469 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 8.000 |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.859 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 1.5750 |
| BDSR | SECOND END SPLINE QUANTITY | 10 |
| AAGZ | FIRST END STYLE | |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 2.641 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 1.5750 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005931800. An older drawing citing one of those numbers resolves here.