NSN 3040-00-765-2408 · NIIN 007652408 · FSC 3040
NO DASHES 3040007652408
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 1.377 AND INCHES MAXIMUM 1.378 |
| AAHN | END SIMILARITY | IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.730 AND INCHES MAXIMUM 1.740 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 1.2610 AND INCHES MAXIMUM 1.2660 |
| AMDM | FIRST END SPLINE LENGTH | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.505 |
| ATPC | STEP QUANTITY | 3 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S6260 |
| BDSQ | FIRST END SPLINE QUANTITY | 24 |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0000 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 1.2000 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.2610 AND INCHES MAXIMUM 1.2660 |
| AAGZ | FIRST END STYLE | |
| ZZZV | FSC APPLICATION DATA | DRIVE SHAFT,ROTOR,HELICOPTER |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.1100 AND INCHES MAXIMUM 1.1200 |
| MATT | MATERIAL | STEEL |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 204-040-602-5 | 21540 |
| 204-040-602-5 | 81996 |
| 204-040-602 | 97499 |
| 204-040-602-005 | 97499 |
| 204-040-602-5 | 97499 |