NSN 3040-00-769-5125 · NIIN 007695125 · FSC 3040
NO DASHES 3040007695125
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Miscellaneous Power Transmission Equipment
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGGZ | SHANK OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 0.316 |
| AGPX | SHOULDER OUTSIDE DIAMETER | FIRST END INCHES NOMINAL 0.468 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 5.000 |
| MATT | MATERIAL | CASING STEEL |
| MATT | MATERIAL | CORE STEEL |
| AGPX | SHOULDER OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 0.343 |
| AHHF | TONGUE THICKNESS | BOTH ENDS INCHES NOMINAL 0.060 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | BOTH ENDS UNF |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.128 |
| CFRW | END OVERALL DIAMETER | SECOND END INCHES NOMINAL 0.750 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 24.109 |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 24.171 |
| AECT | THREAD DEPTH | BOTH ENDS INCHES NOMINAL 0.375 |
| AEDN | TIP LENGTH | FIRST END INCHES NOMINAL 0.375 |
| AEDN | TIP LENGTH | SECOND END INCHES NOMINAL 0.281 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.316 |
| CFRW | END OVERALL DIAMETER | FIRST END INCHES NOMINAL 1.000 |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS BOTH ENDS INCHES NOMINAL 0.104 |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES NOMINAL 0.104 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES NOMINAL 0.152 |
| SFTT | SURFACE TREATMENT | CASING ZINC |
| CBBL | FEATURES PROVIDED | BOTH ENDS SWIVEL END |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 23.000 |
| AXFK | TONGUE LENGTH | BOTH ENDS INCHES NOMINAL 0.312 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| ANQR | PROTECTIVE COATING METHOD | CASING COATED |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | BOTH ENDS ROUND, FLATTED TWO SIDES, EXTERNAL |
| APTD | END TYPE | FIRST END SQUARE MALE |
| APTD | END TYPE | SECOND END SQUARE FEMALE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 500-801 | 82386 |