NSN 3040-00-776-1975 · NIIN 007761975 · FSC 3040
NO DASHES 3040007761975
In Stock
COLLAR,SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | ZINC |
| AEUZ | LARGEST DIAMETER LENGTH | INCHES NOMINAL 0.812 |
| AATE | CHAMFER ANGLE IN DEG | 45.0 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.3770 AND INCHES MAXIMUM 1.3810 |
| STYL | STYLE DESIGNATOR | |
| ABNM | THICKNESS | INCHES NOMINAL 1.062 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.375 |
| CQJX | NOMINAL THREAD SIZE | SINGLE HOLE INCHES 0.250 |
| CQKB | SECURING HOLE TYPE AND LOCATION | THREADED SINGLE HOLE |
| FEAT | SPECIAL FEATURES | SECURING HOLES ARE EQUALLYSPACED ACROSS THK OF COLLAR AT 0.062 IN. INTERVALS AFTER 1ST HOLE CENTERLINE IS POSITIONED 0.438 IN. FROM EITHER EDGE OF THK |
| MATT | MATERIAL | STEEL |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AHYG | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8630-39-11 | 81336 |
| 8630-39-11I | 81336 |
| 13213E5309 | 97403 |
| 8630-39-11I | 98042 |
| 8630-39-111 | 08315 |
Supersedes
This item replaces cancelled NIIN 003768208. An older drawing citing one of those numbers resolves here.