NSN 3040-00-776-2364 · NIIN 007762364 · FSC 3040
NO DASHES 3040007762364
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFM | SHAFT HARDNESS RATING | E HARDENED-SHORE HARDNESS 80-90 |
| CFFN | WORM THREAD SECTION LENGTH | INCHES NOMINAL 0.813 |
| AAHN | END SIMILARITY | IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.313 |
| BYFR | TEETH HARDNESS RATING | E HARDENED-SHORE HARDNESS 80-90 |
| CFFB | WORM THREAD QUANTITY | 2 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.2618 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 20.000 |
| CFFG | WORM HELIX ANGLE | 9 DEG 28 MIN |
| CFFK | WORM OUTSIDE DIAMETER | INCHES MINIMUM 0.577 AND INCHES MAXIMUM 0.580 |
| CFFL | WORM PITCH DIAMETER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.500 |
| CFFX | STRAIGHT UNTHREADED LENGTH | BOTH ENDS INCHES NOMINAL 0.250 |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 0.813 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | BOTH ENDS FIRST PORTION INCHES MINIMUM 0.370 AND INCHES MAXIMUM 0.395 |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | BOTH ENDS FIRST PORTION INCHES MINIMUM 0.0935 AND INCHES MAXIMUM 0.0938 |
| FEAT | SPECIAL FEATURES | 0.250 IN. DIA HOLE THRU CENTER LG OF SHAFT |
| MATT | MATERIAL | STEEL COMP 2315 OR STEEL COMP 4615 OR STEEL COMP 4617 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD ALL MATERIAL RESPONSES SAE 2315,4615 OR 4617 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10305-2 | 72914 |