NSN 3040-00-833-5329 · NIIN 008335329 · FSC 3040
NO DASHES 3040008335329
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | ALUMINUM ALLOY |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ATPC | STEP QUANTITY | 3 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.120 |
| AAGZ | FIRST END STYLE | |
| AAHW | SECOND END GROOVE WIDTH | INCHES NOMINAL 0.0400 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES NOMINAL 0.5940 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.300 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 1.0400 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.275 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 0.6230 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.2040 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 1.035 |
| AMHD | SECOND END HOLE DEPTH | INCHES NOMINAL 0.562 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250,CO- 2024,TE-ER T4 |
| FEAT | SPECIAL FEATURES | 1ST END HAS 4 INT. THD HOLES 0.190 IN. DIA 0.750 IN. D,10 AND 32 UNF 2B THD DES,ALT SPACED AT 60 AND 120 DEG APART ON 0.750 IN. DIA BOLT CIRCLE; 2ND END 2ND CROSSDRILLED HOLE DISTANCE BETWEEN CTRS 0.500 IN.,BOTH HOLES COUNTERBORED 0.318 IN. DIA 0.152 IN. D; 2ND END FLAT GROOVED 0.558 IN. D AND 0.840 IN. LG,0.865 IN. FROM END |
| ZZZV | FSC APPLICATION DATA | AUTOMATIC PILOT SERVO CONTROLS |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1989628-1 | 94580 |