NSN 3040-00-891-1897 · NIIN 008911897 · FSC 3040
NO DASHES 3040008911897
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: T-38 ACFT
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | T-38 ACFT |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.6450 AND INCHES MAXIMUM 0.6500 |
| AMDM | FIRST END SPLINE LENGTH | INCHES MINIMUM 0.650 AND INCHES MAXIMUM 0.660 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 0.6000 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.830 AND INCHES MAXIMUM 0.850 |
| MATT | MATERIAL | STEEL |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.460 AND INCHES MAXIMUM 2.480 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.6450 AND INCHES MAXIMUM 0.6500 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.5000 AND INCHES MAXIMUM 0.5200 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.6450 AND INCHES MAXIMUM 0.6500 |
| ATPC | STEP QUANTITY | 7 |
| BDSQ | FIRST END SPLINE QUANTITY | 12 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.6000 |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 0.850 AND INCHES MAXIMUM 0.870 |
| AAHP | SECOND END STYLE | |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.6450 AND INCHES MAXIMUM 0.6500 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.4800 AND INCHES MAXIMUM 0.5000 |
| BDSR | SECOND END SPLINE QUANTITY | 12 |