NSN 3040-00-896-1996 · NIIN 008961996 · FSC 3040
NO DASHES 3040008961996
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 21.800 AND INCHES MAXIMUM 21.820 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.7318 AND INCHES MAXIMUM 0.7398 |
| BDSQ | FIRST END SPLINE QUANTITY | 25 |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S5743 CSY-JB63.0 |
| AAGZ | FIRST END STYLE | |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0000 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.7972 AND INCHES MAXIMUM 0.8022 |
| AMDM | FIRST END SPLINE LENGTH | INCHES MINIMUM 0.600 AND INCHES MAXIMUM 0.640 |
| CTBM | SECOND END STEP LENGTH | INCHES MINIMUM 0.555 AND INCHES MAXIMUM 0.565 |
| CXYR | SECOND END ANGLE BETWEEN FLATS | DEGREES NOMINAL 180.0 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.850 AND INCHES MAXIMUM 0.854 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 0.7913 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 0.8100 |
| ATPC | STEP QUANTITY | 11 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.7972 AND INCHES MAXIMUM 0.8022 |