NSN 3040-00-915-5850 · NIIN 009155850 · FSC 3040
NO DASHES 3040009155850
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHW | SECOND END GROOVE WIDTH | INCHES NOMINAL 0.0600 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES NOMINAL 0.4200 |
| AAHP | SECOND END STYLE | |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.8725 AND INCHES MAXIMUM 0.8735 |
| CSYM | SURFACE FINISH | MICROINCHES 10.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 5.434 AND INCHES MAXIMUM 5.478 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.8725 AND INCHES MAXIMUM 0.8735 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES MINIMUM 0.114 AND INCHES MAXIMUM 0.118 |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | INCHES MINIMUM 0.334 AND INCHES MAXIMUM 0.338 |
| AMER | FIRST END INTERNAL THREAD LENGTH | INCHES MINIMUM 3.440 AND INCHES MAXIMUM 3.500 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES MINIMUM 0.334 AND INCHES MAXIMUM 0.338 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.4928 AND INCHES MAXIMUM 0.5000 |
| FEAT | SPECIAL FEATURES | 1ST END HOLE 0.440 IN. DIA,COUNTERBORED 0.630 IN. DIA,0.810 IN. MIN 0880 IN. MAX DEEP,COUNTERSINK 30 DEG,0.050 IN. MIN 0.070 IN. MAX LG; 90 DEG ANGLE BETWEEN HOLES |
| MATT | MATERIAL | STEEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ATPC | STEP QUANTITY | 4 |
| AAGZ | FIRST END STYLE | |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.1050 AND INCHES MAXIMUM 0.1150 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 75515 | 80254 |