NSN 3040-00-925-3236 · NIIN 009253236 · FSC 3040
NO DASHES 3040009253236
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.0700 AND INCHES MAXIMUM 1.0900 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | |
| AAHG | FIRST END GROOVE WIDTH | INCHES MINIMUM 0.1830 AND INCHES MAXIMUM 0.1930 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| BDSR | SECOND END SPLINE QUANTITY | 24 |
| AAHP | SECOND END STYLE | |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S6260 |
| AAHH | FIRST END GROOVE DIAMETER | INCHES MINIMUM 1.1460 AND INCHES MAXIMUM 1.1480 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 1.3540 AND INCHES MAXIMUM 1.3560 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 1.2620 AND INCHES MAXIMUM 1.2670 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.2620 AND INCHES MAXIMUM 1.2670 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0000 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.2000 |
| ATPC | STEP QUANTITY | 2 |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.111 |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 1.048 AND INCHES MAXIMUM 1.058 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.450 AND INCHES MAXIMUM 1.456 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 1.354 AND INCHES MAXIMUM 1.356 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 695798 | 99167 |