NSN 3040-00-939-7726 · NIIN 009397726 · FSC 3040
NO DASHES 3040009397726
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | STEEL |
| AMHZ | SECOND END ANGLE BETWEEN HOLES | DEGREES NOMINAL 90.0 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES MINIMUM 0.114 AND INCHES MAXIMUM 0.118 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.8725 AND INCHES MAXIMUM 0.8735 |
| CSYM | SURFACE FINISH | MICROINCHES 10.0 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.1050 AND INCHES MAXIMUM 0.1150 |
| ZZZV | FSC APPLICATION DATA | ENGINE,ACFT,RECIPROCATING |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES MINIMUM 0.334 AND INCHES MAXIMUM 0.338 |
| FEAT | SPECIAL FEATURES | 1 HOLE DRILLED LONGITUDINALLY IN A END,0.440 IN. DIA,3.750 IN.,MIN,3.810 IN. MAX DEEP WITH RELIEF GROOVE 0.200 IN. W,0.720 IN. DIA,LOCATED 0.950 IN. FROM A END OF SHAFT,INTERNAL STRAIGHT SPLINE,12 TEETH,0.950 IN. LG,0.5525 IN. MIN DIA,0.695 IN. MAX DIA 30 DEG PRESSURE ANGLE |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.8725 AND INCHES MAXIMUM 0.8735 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| AAHW | SECOND END GROOVE WIDTH | INCHES NOMINAL 0.0600 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES NOMINAL 0.4200 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 5.754 AND INCHES MAXIMUM 5.778 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.4928 AND INCHES MAXIMUM 0.5000 |
| ATPC | STEP QUANTITY | 4 |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | INCHES MINIMUM 0.334 AND INCHES MAXIMUM 0.338 |