NSN 3040-00-980-2285 · NIIN 009802285 · FSC 3040
NO DASHES 3040009802285
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.5205 AND INCHES MAXIMUM 0.5250 |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | INCHES NOMINAL 0.625 |
| AMFX | SECOND END TONGUE THICKNESS | INCHES MINIMUM 0.309 AND INCHES MAXIMUM 0.310 |
| AMFY | SECOND END TONGUE WIDTH | INCHES MINIMUM 0.775 AND INCHES MAXIMUM 0.807 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.7750 AND INCHES MAXIMUM 0.8070 |
| ATPC | STEP QUANTITY | 7 |
| CSYM | SURFACE FINISH | MICROINCHES 20.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.274 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.873 AND INCHES MAXIMUM 0.874 |
| CTBM | SECOND END STEP LENGTH | INCHES NOMINAL 0.281 |
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| FEAT | SPECIAL FEATURES | FIRST END BORE DRILL B(.236-243)TO DIM SHOWN.CSINK .300-320 DIA BY 60 DEG INCL ANGLE-RM .262-268 DIA 1.670-1.700 DP-RM .279-283 DIA BY 1.365-1.395 DP-CONC W/.807 DIA W/IN .010 F.I.R.;SECOND END CIR GROOVED 0.780 DISTANCE FROM END TO GROOVE,0.500 GROOVE W,0.420 GROOVE DIA;SECOND END OPTIONAL CTR DRILL HOLE 0.110 DIA; SEC0ND END REQD INT DRILL HOLE 0.093 DIA,0.250 DISTANCE BTWN HOLE CTRS |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 006788969. An older drawing citing one of those numbers resolves here.