NSN 3040-00-997-1690 · NIIN 009971690 · FSC 3040
NO DASHES 3040009971690
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | FIRST END SIX NOTCHES RADIALLY SPACED AT 60 DEG,0.453 IN. NOTCH MJR DIA,0.281 IN. NOTCH MIN DIA,0.200 IN. NOTCH LG;FIRST END BORE,0.281 IN. BORE DIA,0.125 IN. BORE DP;SECOND END UNTHD CROSS DRILLED THRU HOL,0.630 IN. HOLE DIA,0.435 IN. DISTANCE FROM HOLE C TO END |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 0.2498 |
| AMHT | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | INCHES NOMINAL 0.355 |
| ATPC | STEP QUANTITY | 6 |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.920 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 0.4530 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.059 |
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MATT | MATERIAL | STEEL COMP 303 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES MINIMUM 0.2280 AND INCHES MAXIMUM 0.2310 |
| AAHW | SECOND END GROOVE WIDTH | INCHES MINIMUM 0.0400 AND INCHES MAXIMUM 0.0430 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 0.453 |