NSN 3040-01-030-8656 · NIIN 010308656 · FSC 3040
NO DASHES 3040010308656
In Stock
SHAFT,DRIVE,FLEXIBLE
Miscellaneous Power Transmission Equipment
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 20.000 |
| ABSA | SPLINE QUANTITY | 12 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.250 |
| AGQM | END OVERALL LENGTH | SECOND END INCHES NOMINAL 1.060 |
| AGQM | END OVERALL LENGTH | FIRST END INCHES NOMINAL 1.000 |
| APQB | UNIT TYPE | WIRE WOUND |
| APTD | END TYPE | FIRST END ROUND, INTERNAL SPLINED |
| APTD | END TYPE | SECOND END ROUND FEMALE |
| ASAP | SPLINE PITCH | 48 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 |
| AXFH | SPLINE LENGTH | SINGLE INCHES NOMINAL 0.250 |
| CFQX | MACHINED FEATURE SIZE | 0.188 IN. NOM DIA BY 0.620 IN. NOM DEEP HOLE |
| MATT | MATERIAL | SHAFT STEEL |
| NMBR | QUANTITY | 1 |
| SCSZ | CROSS SECTION SIZE | DIAMETER SECOND END INCHES NOMINAL 0.410 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES NOMINAL 0.410 |
| TRSZ | THREAD SIZE | SECOND SECURING HOLE INCHES MAJOR 0.138-32 |
| TRSZ | THREAD SIZE | FIRST SECURING HOLE INCHES MAJOR 0.112-40 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 480895-3 | 3B150 |
| 480895-3 | 49956 |
| 480895-3 | 54X10 |
| 11772X20INLG | 97945 |
| 11772X20INLG | 0KZS2 |
| FAUS612TX2 | 0KZS2 |