NSN 3040-01-113-6875 · NIIN 011136875 · FSC 3040
NO DASHES 3040011136875
In Stock
SHAFT,STRAIGHT
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHG | FIRST END GROOVE WIDTH | INCHES MINIMUM 0.0290 AND INCHES MAXIMUM 0.0320 |
| AAHH | FIRST END GROOVE DIAMETER | INCHES MINIMUM 0.3500 AND INCHES MAXIMUM 0.3540 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| AAHW | SECOND END GROOVE WIDTH | INCHES MINIMUM 0.0290 AND INCHES MAXIMUM 0.0320 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES MINIMUM 0.3500 AND INCHES MAXIMUM 0.3540 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.940 |
| AKTM | FIRST END SLOT WIDTH | INCHES NOMINAL 0.060 |
| AKTN | SECOND END SLOT WIDTH | INCHES NOMINAL 0.060 |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | INCHES MINIMUM 0.402 AND INCHES MAXIMUM 0.405 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.3745 AND INCHES MAXIMUM 0.3747 |
| AMDW | FIRST END SLOT DEPTH | INCHES NOMINAL 0.090 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES MINIMUM 0.408 AND INCHES MAXIMUM 0.411 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.3745 AND INCHES MAXIMUM 0.3747 |
| AMGR | SECOND END SLOT DEPTH | INCHES NOMINAL 0.090 |
| CSYM | SURFACE FINISH | MICROINCHES 8.0 |
| MATT | MATERIAL | STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,COND A |