NSN 3040-01-123-3015 · NIIN 011233015 · FSC 3040
NO DASHES 3040011233015
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 8.310 |
| ACKY | FIRST END WIDTH ACROSS FLATS | INCHES MINIMUM 0.621 AND INCHES MAXIMUM 0.623 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7490 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 1.5000 |
| AMGS | SECOND END HOLE DIAMETER | SECOND HOLE INCHES NOMINAL 0.2500 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.2810 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 1.440 |
| AMHS | SECOND END DISTANCE BETWEEN HOLE CENTERS | INCHES NOMINAL 0.560 |
| AMHZ | SECOND END ANGLE BETWEEN HOLES | DEGREES NOMINAL 90.0 |
| ATPC | STEP QUANTITY | 2 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.500 |
| CSQZ | FIRST END STEP LENGTH | INCHES NOMINAL 1.250 |
| CSYM | SURFACE FINISH | MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | SECOND END HAS TWO IDENT INDENTED FLATS,0.125 IN. FLAT DP,1.000 IN. FLAT LG,1.440 IN. DISTANCE FROM FLAT CTR TO END,180 DEG ANGLE BTWN FLATS;SECOND END BORED,0.751/0.752 IN. DIA,2.120 IN. LG;SECOND END HAS ONE INT FLAT KEYWAY ALONG BORE LG,0.188/0.190 IN. KEYWAY W,1.940 IN. KEYWAY LG,0.102 IN. KEYWAY DP |
| MATT | MATERIAL | STEEL COMP 304 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-769,COND B |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 709-4684922 ITEM 10 | 80064 |
| 709-4684922 | 80064 |
| 87832-1651 ITEM 10 | 96169 |
| 87832-1651 | 96169 |