NSN 3040-01-149-6383 · NIIN 011496383 · FSC 3040
NO DASHES 3040011496383
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| AAHW | SECOND END GROOVE WIDTH | INCHES NOMINAL 0.1050 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES NOMINAL 0.5950 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.967 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 0.5790 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 1.060 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES NOMINAL 0.4275 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.5288 |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 0.5000 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.460 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 1.1800 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 0.460 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 0.6150 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.7163 |
| ATPC | STEP QUANTITY | 3 |
| BDSQ | FIRST END SPLINE QUANTITY | 16 |
| BDSR | SECOND END SPLINE QUANTITY | 22 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.180 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S6470 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 105096 | 11599 |