NSN 3040-01-161-0948 · NIIN 011610948 · FSC 3040
NO DASHES 3040011610948
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 30.438 |
| ACMD | SECOND END WIDTH ACROSS FLATS | INCHES NOMINAL 2.000 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 6.6250 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 2.4360 AND INCHES MAXIMUM 2.4370 |
| ATPC | STEP QUANTITY | 12 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 6.625 |
| CTBM | SECOND END STEP LENGTH | INCHES NOMINAL 1.250 |
| FEAT | SPECIAL FEATURES | 1ST END PARTIALLY BORED 2.000 IN. DIA;COUNTERBORED 3.250 IN. DIA;1ST END SIX 0.483 IN. DIA DRILLED THROUGH HOLES EQUALLY SPACED ON 5.500 IN. DIA BOLT CIRCLE;THREAD 2.548 IN.-18 USS THD NEAR 2ND END,WITH 0.313X0.094 IN. FLAT KEYWAY |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| X73795-A | 1Q8T8 |
| 3302952 | 80064 |
| 3302952 ITEM 1 | 80064 |
| B-73795A | 95402 |
| 73795-A | 95402 |
| X73795-A | 95402 |
| D81-945-12 PIECE 1 | 95402 |
| D-81-945-12 | 95402 |