NSN 3040-01-185-0710 · NIIN 011850710 · FSC 3040
NO DASHES 3040011850710
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: MAIN FUEL PUMP,708000,FOR F100 ACFT ENGINE
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 7.160 AND INCHES MAXIMUM 7.220 |
| AGAV | END ITEM IDENTIFICATION | MAIN FUEL PUMP,708000,FOR F100 ACFT ENGINE |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.7840 AND INCHES MAXIMUM 0.7843 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 0.6800 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 0.7645 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.8725 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.8333 |
| BDSR | SECOND END SPLINE QUANTITY | 20 |
| FEAT | SPECIAL FEATURES | BORE THRU SHAFT LENGTH 0.5925 IN. FIRST END,0.5875 IN. SECOND END NOM DIA; 0.241 IN. THK FLANGE 2.16 - 2.17 IN.OD 2 IN. FROM SECOND END; 0.875-20UNJEF-3A THD ON 0.795 IN. DIA SHAFT 3.08 IN.FROM FIRST END; USED TO POWER PUMP IMPELLER |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S6487H-11 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 217125 | 59875 |