NSN 3040-01-185-0711 · NIIN 011850711 · FSC 3040
NO DASHES 3040011850711
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: MAIN FUEL PUMP,708000,FOR F100 ACFT ENGINE
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.140 AND INCHES MAXIMUM 4.160 |
| AGAV | END ITEM IDENTIFICATION | MAIN FUEL PUMP,708000,FOR F100 ACFT ENGINE |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 0.3725 |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | INCHES NOMINAL 0.375 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 0.2050 |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 0.4315 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.5395 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.5000 |
| ATPC | STEP QUANTITY | 7 |
| BDSR | SECOND END SPLINE QUANTITY | 12 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.605 AND INCHES MAXIMUM 0.620 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S6487H-11 |
| SUPP | SUPPLEMENTARY FEATURES | SPEED SENSOR DRIVE GEAR SHAFT |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 217152 | 59875 |