NSN 3040-01-220-0039 · NIIN 012200039 · FSC 3040
NO DASHES 3040012200039
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 48.000 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.9970 AND INCHES MAXIMUM 0.9980 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 1.813 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.8490 AND INCHES MAXIMUM 0.8540 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.9970 AND INCHES MAXIMUM 0.9980 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.9970 AND INCHES MAXIMUM 0.9980 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.813 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.8490 AND INCHES MAXIMUM 0.8540 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.9970 AND INCHES MAXIMUM 0.9980 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.2813 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 0.906 |
| AMHD | SECOND END HOLE DEPTH | INCHES NOMINAL 0.998 |
| ATPC | STEP QUANTITY | 3 |
| BDSQ | FIRST END SPLINE QUANTITY | 10 |
| BDSR | SECOND END SPLINE QUANTITY | 10 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.350 |
| MATT | MATERIAL | NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-N-281,CLASS A AND MIL SPEC SINGLE MATERIAL RESPONSE -IL-T-1368,TYE 1,CONDITION 1 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SSN637-505-2143924 PIECE 14 | 80064 |
| SSN637-505-2143924 | 80064 |
| 77656-31X6 PIECE 14 | 96169 |
| 77656-31X6 | 96169 |