NSN 3040-01-268-9954 · NIIN 012689954 · FSC 3040
NO DASHES 3040012689954
In Stock
GEARSHAFT,BEVEL
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 8.070 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 8.070 |
| AJLA | TEETH QUANTITY | 31 |
| AJWS | GEAR OUTSIDE DIAMETER | INCHES MINIMUM 3.840 AND INCHES MAXIMUM 3.850 |
| ANJS | SHAFT END TYPE | PLAIN AND SPLINED INVOLUTE, INTERNAL |
| AQGH | DIAMETRAL PITCH | 8.538 |
| CBBL | FEATURES PROVIDED | SPIRAL |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQD | PITCH ANGLE | DEGREES 25.1667 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| CYEQ | SHAFT MATERIAL | STEEL |
| CYER | GEAR MATERIAL | STEEL |
| CYET | SHAFT LARGEST DIAMETER | INCHES NOMINAL 2.780 |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| CYEV | LONGER SHAFT SEGMENT LENGTH | INCHES NOMINAL 4.755 |
| CYEW | SHAFT END SIZE | INCHES 1.336 AND INCHES 2.248 |
| FEAT | SPECIAL FEATURES | LONGEST SHAFT END HAS EXT THSD,2.360-18 UNS-3A |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7-211320021-9 | 22907 |
| 7-211320021-9 | 8V613 |
| 7-211320021-9 | 02731 |
| 7-211320021 | 02731 |
| 7-211320021-9 | 15152 |