NSN 3040-01-283-0030 · NIIN 012830030 · FSC 3040
NO DASHES 3040012830030
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: USED ON B-1B ACFT
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.684 |
| AGAV | END ITEM IDENTIFICATION | USED ON B-1B ACFT |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 0.3750 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 0.3140 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 0.5500 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 0.1725 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.2795 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.2500 |
| ATPC | STEP QUANTITY | 8 |
| BDSR | SECOND END SPLINE QUANTITY | 8 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 0.7500 |
| CSYM | SURFACE FINISH | MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | FIRST END CHAMFER 0.025X45 DEG.HOLE DRILLED THUR 0.435 IN. FROM FIRST END 0.1935 IN. DIA. |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD ALL MATERIAL RESPONSES A-S5643 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| L3001901-005 | 3DDL3 |
| L3001901-005 | 43999 |
| L3001901-005 | 10000 |
| L3001901-005 | 18868 |