NSN 3040-01-302-2994 · NIIN 013022994 · FSC 3040
NO DASHES 3040013022994
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.140 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 1.2500 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 1.0100 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.0812 AND INCHES MAXIMUM 1.0912 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.2450 AND INCHES MAXIMUM 1.2500 |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 1.2000 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.9743 AND INCHES MAXIMUM 0.9793 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.0600 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.7997 AND INCHES MAXIMUM 0.8127 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.9743 AND INCHES MAXIMUM 0.9793 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.9167 |
| ATPC | STEP QUANTITY | 9 |
| BDSQ | FIRST END SPLINE QUANTITY | 24 |
| BDSR | SECOND END SPLINE QUANTITY | 11 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 1.353 AND INCHES MAXIMUM 1.355 |
| MATT | MATERIAL | STEEL COMP 17-4PH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 22086 | 93835 |