NSN 3040-01-306-9271 · NIIN 013069271 · FSC 3040
NO DASHES 3040013069271
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: 3930-01-275-6420
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHG | FIRST END GROOVE WIDTH | INCHES NOMINAL 0.0600 |
| AAHH | FIRST END GROOVE DIAMETER | INCHES NOMINAL 0.9400 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.800 |
| AGAV | END ITEM IDENTIFICATION | 3930-01-275-6420 |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.100 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 1.0000 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 1.1170 AND INCHES MAXIMUM 1.1250 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 0.800 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.0138 AND INCHES MAXIMUM 1.0171 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.1170 AND INCHES MAXIMUM 1.1250 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.0833 |
| ATPC | STEP QUANTITY | 2 |
| BDSR | SECOND END SPLINE QUANTITY | 26 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.125 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | FIRST END HAS INTERNAL HEXAGON FLATS |
| MATT | MATERIAL | STEEL COMP 4130 |