NSN 3040-01-338-2412 · NIIN 013382412 · FSC 3040
NO DASHES 3040013382412
In Stock
CYLINDER ASSEMBLY,ACTUATING,LINE
Miscellaneous Power Transmission Equipment
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHB | FIRST END OUTSIDE DIAMETER | ALL WORKING ENDS INCHES NOMINAL 1.500 |
| AAXX | MOUNTING TYPE | CENTER SECTION TRUNNION |
| ABKP | MOUNTING FACILITY LENGTH | INCHES NOMINAL 8.000 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 4.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 4.500 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 4.000 |
| AMDX | FIRST END HOLE DIAMETER | ALL WORKING ENDS INCHES NOMINAL 0.750 |
| AMPC | FIRST END THICKNESS AT MOUNTING HOLES | ALL WORKING ENDS INCHES NOMINAL 1.250 |
| AMQZ | COMPRESSED LENGTH | INCHES NOMINAL 27.938 |
| ATEM | EXTENDED LENGTH | INCHES NOMINAL 47.938 |
| BGST | PRESSURE RATING | POUNDS PER SQUARE INCH (PSI) MINIMUM 70.0 AND POUNDS PER SQUARE INCH (PSI) MAXIMUM 150.0 |
| BHMS | MOUNTING PROVISION FOR WHICH DESIGNED | PIN(S) |
| CKRM | INTEGRAL VALVE OPERATION METHOD | PNEUMATIC |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| CKSF | FIRST PISTON ROD END STYLE | |
| CLMQ | MOUNTING FACILITY DIAMETER | INCHES NOMINAL 1.000 |
| CLMT | PORT STYLE | |
| CLMW | PORT THREAD SERIES DESIGNATOR | ALL PORTS UNIFIED NATIONAL JOINT FINE (UNJF) |
| CLMX | PORT THREAD DIAMETER | ALL PORTS INCHES NOMINAL 0.875 |
| CLMY | PORT THREAD QUANTITY PER INCH | 14 |
| CLNB | PORT THREAD CLASS | 3B |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TL15HACX3AAG8356 | 60285 |
| G8356 | 60285 |
| TL15HAXX3AAAK137 | 60285 |
| TL15HACX3AAAK137 | 60285 |