NSN 3040-01-338-5893 · NIIN 013385893 · FSC 3040
NO DASHES 3040013385893
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.465 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.4030 AND INCHES MAXIMUM 0.4060 |
| AMDM | FIRST END SPLINE LENGTH | INCHES MINIMUM 0.474 AND INCHES MAXIMUM 0.490 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.3250 AND INCHES MAXIMUM 0.3340 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.4030 AND INCHES MAXIMUM 0.4060 |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 0.3750 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.4970 AND INCHES MAXIMUM 0.5000 |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 0.637 AND INCHES MAXIMUM 0.663 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.3950 AND INCHES MAXIMUM 0.4040 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.4970 AND INCHES MAXIMUM 0.5000 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.4580 |
| ATPC | STEP QUANTITY | 1 |
| BDSQ | FIRST END SPLINE QUANTITY | 12 |
| BDSR | SECOND END SPLINE QUANTITY | 11 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 0.279 |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S5643 CLASS 17-4H |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 58648 | 93835 |