NSN 3040-01-345-3952 · NIIN 013453952 · FSC 3040
NO DASHES 3040013453952
In Stock
SHAFT,STRAIGHT
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.093 |
| ABKZ | EXTERNAL KEYWAY LENGTH | FIRST END INCHES NOMINAL 0.438 |
| ABKZ | EXTERNAL KEYWAY LENGTH | SECOND END INCHES NOMINAL 0.438 |
| AMCZ | FIRST END KEYWAY WIDTH | INCHES NOMINAL 0.1250 |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | INCHES NOMINAL 0.500 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4340 |
| AMES | FIRST END DISTANCE BETWEEN KEYWAY CENTERS | INCHES NOMINAL 1.8120 |
| AMFE | FIRST END ANGLE BETWEEN KEYWAYS | DEGREES NOMINAL 45.0 |
| AMFR | SECOND END KEYWAY WIDTH | INCHES NOMINAL 0.1250 |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | INCHES NOMINAL 2.531 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.3130 AND INCHES MAXIMUM 0.3180 |
| AMHQ | SECOND END DISTANCE BETWEEN KEYWAY CENTERS | INCHES NOMINAL 2.0000 |
| AMHY | SECOND END ANGLE BETWEEN KEYWAYS | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | FIRST END IS CIRCULAR GROOVED,1.739 IN. FROM END,0.034 IN. WIDTH,0.410 IN. DIA;FIRST END IS ALSO SLOTTED,0.125 IN. WIDE,0.125 IN. DEEP |
| MATT | MATERIAL | STEEL COMP 416 |