NSN 3040-01-370-2846 · NIIN 013702846 · FSC 3040
NO DASHES 3040013702846
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 54.8750 |
| ABKZ | EXTERNAL KEYWAY LENGTH | SECOND END INCHES MAXIMUM 4.3130 |
| ABKZ | EXTERNAL KEYWAY LENGTH | FIRST END INCHES MAXIMUM 4.5630 |
| AMCZ | FIRST END KEYWAY WIDTH | INCHES MAXIMUM 0.8750 |
| AMDG | FIRST END KEYWAY DEPTH | INCHES NOMINAL 0.6250 |
| AMDL | FIRST END DIAMETER | INCHES MAXIMUM 3.3760 |
| AMFE | FIRST END ANGLE BETWEEN KEYWAYS | DEGREES NOMINAL 90.0 |
| AMFR | SECOND END KEYWAY WIDTH | INCHES MAXIMUM 2.8800 |
| AMFT | SECOND END KEYWAY DEPTH | INCHES NOMINAL 0.6250 |
| AMFZ | SECOND END DIAMETER | INCHES MAXIMUM 3.3760 |
| AMHY | SECOND END ANGLE BETWEEN KEYWAYS | DEGREES NOMINAL 90.0 |
| AMHZ | SECOND END ANGLE BETWEEN HOLES | DEGREES NOMINAL 180.0 |
| ATPC | STEP QUANTITY | 5 |
| CSPY | LARGEST STEP DIAMETER | INCHES MAXIMUM 4.0000 |
| FEAT | SPECIAL FEATURES | 2 INTERNALLY THREADED HOLES BOTH ENDS,27/64 DRILL 1/2-13 NC TAP,1 INCH DEEP |
| MATT | MATERIAL | STEEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| Z440237 | 58861 |
| Z440237 REV G FN 4 | 60587 |
| Z740108 | 60587 |