NSN 3040-01-385-9050 · NIIN 013859050 · FSC 3040
NO DASHES 3040013859050
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Miscellaneous Power Transmission Equipment
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUJ | SPLINE MAJOR DIAMETER | FIRST END INCHES NOMINAL 0.769 |
| AAUJ | SPLINE MAJOR DIAMETER | SECOND END INCHES NOMINAL 0.787 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 15.000 |
| ABSA | SPLINE QUANTITY | 23 |
| ABSA | SPLINE QUANTITY | 17 |
| AGJR | MINOR DIAMETER | SPLINE SECOND END INCHES NOMINAL 0.689 |
| AGJR | MINOR DIAMETER | SPLINE FIRST END INCHES NOMINAL 0.670 |
| AGJS | PITCH DIAMETER | SECOND END INCHES NOMINAL 0.718 |
| AGJS | PITCH DIAMETER | FIRST END INCHES NOMINAL 0.708 |
| APTD | END TYPE | BOTH ENDS ROUND, INTERNAL SPLINED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | SECOND END INCHES NOMINAL 1.000 |
| AXFH | SPLINE LENGTH | FIRST END INCHES NOMINAL 1.000 |
| AXYS | SPLINE TYPE | BOTH ENDS INVOLUTE |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 9.500 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.625 |
| CFRW | END OVERALL DIAMETER | BOTH ENDS INCHES MINIMUM 1.120 AND INCHES MAXIMUM 1.125 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 912S0116-1 | 56672 |
| 912S0116 | 56672 |
| S26497 | 58037 |
| 26497-801 | 58037 |
| 26497-801 | 72166 |
| S26497-801 | 72166 |