NSN 3040-01-397-7835 · NIIN 013977835 · FSC 3040
NO DASHES 3040013977835
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: 2350-01-087-1095
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 43.420 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-087-1095 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 2.8600 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 2.520 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES NOMINAL 2.5880 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MAXIMUM 2.7500 |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 2.6875 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 2.8600 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 2.820 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 2.5880 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 2.7500 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 2.6875 |
| ATPC | STEP QUANTITY | 6 |
| BDSQ | FIRST END SPLINE QUANTITY | 43 |
| BDSR | SECOND END SPLINE QUANTITY | 43 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 2.8600 |
| CSYM | SURFACE FINISH | MICROINCHES 100.0 |
| FEAT | SPECIAL FEATURES | FIRST END HAS HORIZONTAL HOLE 2.0483 IN DIA,1.50 IN DEEP |
| MATT | MATERIAL | STEEL COMP 4340 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12371047 | 19207 |
Supersedes
This item replaces cancelled NIIN 010841328. An older drawing citing one of those numbers resolves here.