NSN 3040-01-412-2692 · NIIN 014122692 · FSC 3040
NO DASHES 3040014122692
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHG | FIRST END GROOVE WIDTH | INCHES MINIMUM 0.0680 AND INCHES MAXIMUM 0.0720 |
| AAHH | FIRST END GROOVE DIAMETER | INCHES MINIMUM 1.4680 AND INCHES MAXIMUM 1.4730 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.500 |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.250 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 1.5749 AND INCHES MAXIMUM 1.5753 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 1.5625 |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | INCHES NOMINAL 0.7188 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES NOMINAL 1.1250 |
| ATPC | STEP QUANTITY | 3 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 1.7490 AND INCHES MAXIMUM 1.7500 |
| CSYM | SURFACE FINISH | MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | LOCTITE SHOULD BE USED AT THE ASSEMBLY OF PNS 58&103 TO COMPLETE ITEM 57,INTERNAL THREADS 3/4-10UNC-28 X 1 1/8 DEEP,ALSO TWO FLAT GROOVES ON SECOND END 5/16 IN. LG X 3/32 IN. X 3/32 IN. DEEP,180 DEGREES APART |
| MATT | MATERIAL | STEEL COMP 440C |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 802-5773417 | 53711 |
| 802-5773417 ITEM 57 | 53711 |
| D204811G001 ITEM 57 | 98523 |
| D204811G001-57 | 98523 |