NSN 3040-01-444-5460 · NIIN 014445460 · FSC 3040
NO DASHES 3040014445460
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 0.380 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.840 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END FIRST PORTION UNIFIED NATIONAL COARSE (UNC) |
| AKAF | SHAFT THREAD DIRECTION | FIRST END FIRST PORTION RIGHT-HAND |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 12.800 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 20.0000 |
| CFFG | WORM HELIX ANGLE | 3 DEGREES |
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 0.530 |
| CFFN | WORM THREAD SECTION LENGTH | INCHES NOMINAL 0.580 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FIRST PORTION INCHES NOMINAL 0.500 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END THIRD PORTION INCHES NOMINAL 0.250 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END SECOND PORTION INCHES NOMINAL 0.440 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SECOND PORTION INCHES NOMINAL 0.530 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END THIRD PORTION INCHES NOMINAL 0.410 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FIRST PORTION INCHES NOMINAL 0.625 |
| MATT | MATERIAL | STEEL |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6406839 | 53711 |
| 752-6406839-79 | 53711 |
| DF1706-439 | 53711 |