NSN 3040-01-481-2287 · NIIN 014812287 · FSC 3040
NO DASHES 3040014812287
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: SCUTTLE
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHG | FIRST END GROOVE WIDTH | INCHES NOMINAL 0.1250 |
| AAHH | FIRST END GROOVE DIAMETER | INCHES NOMINAL 1.0000 |
| AAHN | END SIMILARITY | IDENTICAL |
| AAHP | SECOND END STYLE | |
| AAHW | SECOND END GROOVE WIDTH | INCHES NOMINAL 0.1250 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES NOMINAL 1.0000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.9375 |
| AGAV | END ITEM IDENTIFICATION | SCUTTLE |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.8750 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 1.2480 AND INCHES MAXIMUM 1.2490 |
| AMDX | FIRST END HOLE DIAMETER | INCHES NOMINAL 0.1250 |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 0.5000 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.8750 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 1.2480 AND INCHES MAXIMUM 1.2490 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.1250 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 0.5000 |
| ATPC | STEP QUANTITY | 5 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 1.2480 AND INCHES MAXIMUM 1.2490 |
| CSYM | SURFACE FINISH | MICROINCHES 250.0 |
| FEAT | SPECIAL FEATURES | BOTH ENDS CHAMFERED 45 DEGREES 1/8"WITH 8NC THREADS |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE-A-S-QQ-S-763 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8100-1253-0238 | 70876 |
| 8100-1253-0238 FIND NO 572 | 70876 |