NSN 3040-01-483-8561 · NIIN 014838561 · FSC 3040
NO DASHES 3040014838561
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: NSSN CLASS SUBMARINE
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 17.7800 |
| AGAV | END ITEM IDENTIFICATION | NSSN CLASS SUBMARINE |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 2.2470 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 3.0500 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.9130 AND INCHES MAXIMUM 1.9280 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 2.2450 AND INCHES MAXIMUM 2.2470 |
| AMDX | FIRST END HOLE DIAMETER | INCHES NOMINAL 0.6410 |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 1.5600 |
| AMEB | FIRST END HOLE DEPTH | INCHES NOMINAL 2.2470 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.2500 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.6410 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 0.6200 |
| ATPC | STEP QUANTITY | 4 |
| BDSQ | FIRST END SPLINE QUANTITY | 9 |
| BDSR | SECOND END SPLINE QUANTITY | 9 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 3.0000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, UPPER |
| FEAT | SPECIAL FEATURES | SHAFT IS MODIFIED 10 SPLINE EACH END. SECOND END DRILLED THRU 90 DEGRESS OPPOSITE THRU HOLE ON FIRST END |
| MATT | MATERIAL | NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-N-286 FOR--2 COND-ANL |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 563-7067897-42 | 53711 |
| 7067897 | 53711 |
| H696-1603-42 | 96169 |