NSN 3040-01-487-6388 · NIIN 014876388 · FSC 3040
NO DASHES 3040014876388
In Stock
GEARSHAFT,SPUR
Miscellaneous Power Transmission Equipment
Application: LOS ANGELES CLASS SSN (688)
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 15.440 |
| AGAV | END ITEM IDENTIFICATION | LOS ANGELES CLASS SSN (688) |
| AJLA | TEETH QUANTITY | 12 |
| AJWS | GEAR OUTSIDE DIAMETER | INCHES NOMINAL 4.905 |
| ANJS | SHAFT END TYPE | BEARING SEAT |
| AQGH | DIAMETRAL PITCH | 3 |
| AQPL | FACE WIDTH | INCHES NOMINAL 3.500 |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CYEQ | SHAFT MATERIAL | STEEL COMP 630 |
| CYER | GEAR MATERIAL | STEEL COMP 630 |
| CYET | SHAFT LARGEST DIAMETER | INCHES MINIMUM 3.245 AND INCHES MAXIMUM 3.247 |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| CYEV | LONGER SHAFT SEGMENT LENGTH | INCHES NOMINAL 10.630 |
| CYEW | SHAFT END SIZE | INCHES 1.997 |
| FEAT | SPECIAL FEATURES | GEARSHAFT HAS BEARING SURFACE ON BOTH ENDS; FIRST END SPLINED AFTER BEARING SURFACE FOR 3.440 INCHES MIN EXTENT OF FULL SPLINE, THE TOTAL LENGTH OF THE SPLINES IS 3.880 INCHES; MANUFACTURE CALLS THIS A GEAR, PINION; MATERIAL SPECS, ASTM-A564 TY-630 COND-H1100; SHAFT AND GEAR ARE ONE PIECE; NHA P/N 721-7069909-A1 ACTUATOR ASSEMBLY, ROTARY HYDRAULIC. |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7069909 | 53711 |
| 721-7069909-21 | 53711 |
| H861-1505-21 | 96169 |