NSN 3040-01-492-6413 · NIIN 014926413 · FSC 3040
NO DASHES 3040014926413
In Stock
CAM,CONTROL
Miscellaneous Power Transmission Equipment
Application: NHA MODEL 7800 ACTUATOR
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.688 |
| AGAV | END ITEM IDENTIFICATION | NHA MODEL 7800 ACTUATOR |
| AGEN | CAM WIDTH | INCHES NOMINAL 0.566 |
| ANTN | SPECIFIC USE | ACTUATES SWITCH |
| AYSZ | CAM OVERALL LENGTH | INCHES NOMINAL 1.331 |
| CBBL | FEATURES PROVIDED | SLOTTED |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CAM DUAL SWITCH |
| FEAT | SPECIAL FEATURES | SHAFT HOLE 0.313 IN DRILLED THRU AND CHAMFER .02 X 45 DEGREES 1.050-1.055 IN. FROM CAM TIP; DRILL NUMBER 36 THRU SLOT AND TAP 6-32 UNC 0.688 IN. FROM CAM TIP TO CENTER; DRILL NUMBER 28 THRU TO SAW CUT AND CHAMFER .02 X 45 DEGREES, THIS HOLE FOR CLAMPING CAM TO SHAFT; SLOT IS .03 IN. WIDE; HARD BLACK ANODIZE .001 THICK. |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | ANODIZE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7800PL FIND 12 | 63600 |
| 7845 | 63600 |
| 7800 | 63600 |
| 7845-610-003 | 63600 |