NSN 3040-01-494-3543 · NIIN 014943543 · FSC 3040
NO DASHES 3040014943543
In Stock
GEARSHAFT,HELICAL
Miscellaneous Power Transmission Equipment
Application: GEARBOX, RAMMER DRIVE
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 15.997 AND INCHES MAXIMUM 16.047 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 15.997 AND INCHES MAXIMUM 16.047 |
| AGAV | END ITEM IDENTIFICATION | GEARBOX, RAMMER DRIVE |
| AJWS | GEAR OUTSIDE DIAMETER | INCHES MINIMUM 1.999 AND INCHES MAXIMUM 2.001 |
| ANJS | SHAFT END TYPE | CIRCULAR GROOVED, KEYWAY WOODRUFF AND BEARING SEAT |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWNM | TOOTH DIRECTION | RIGHT |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE INPUT |
| CYEQ | SHAFT MATERIAL | STEEL COMP E9310 |
| CYER | GEAR MATERIAL | STEEL COMP E9310 |
| CYET | SHAFT LARGEST DIAMETER | INCHES MINIMUM 1.999 AND INCHES MAXIMUM 2.001 |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| CYEV | LONGER SHAFT SEGMENT LENGTH | INCHES MINIMUM 6.907 AND INCHES MAXIMUM 6.937 |
| CYEW | SHAFT END SIZE | INCHES 0.999 AND INCHES 1.2509 |
| FEAT | SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1; NUMBER OF THREAD STARTS 2; MATES WITH P/N H832-1662-4 (CAGE 96169); MATCHED PAIR FOR P/N H832-1662-3 AND 4 NSN 3020-01-494-0562; NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053; USED ON NSSN CLASS SUBMARINE |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349-DOD-F-24669 TO 1 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7068477 | 53711 |
| 752-7068477-3 | 53711 |
| 7108115-3 | 5G804 |
| H832-1662-3 | 96169 |