NSN 3040-01-496-2231 · NIIN 014962231 · FSC 3040
NO DASHES 3040014962231
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: ANCHOR & ANCHOR CHAIN SECURING MECHANISM ASSEMBLY; W/S:LOS AGENLES CLASS SSN (688)
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHG | FIRST END GROOVE WIDTH | INCHES NOMINAL 0.3800 |
| AAHH | FIRST END GROOVE DIAMETER | INCHES NOMINAL 0.8000 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| AAHW | SECOND END GROOVE WIDTH | INCHES NOMINAL 0.3800 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES NOMINAL 0.8000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 33.190 |
| ABKZ | EXTERNAL KEYWAY LENGTH | SECOND END INCHES MINIMUM 2.625 AND INCHES MAXIMUM 2.637 |
| AGAV | END ITEM IDENTIFICATION | ANCHOR & ANCHOR CHAIN SECURING MECHANISM ASSEMBLY; W/S:LOS AGENLES CLASS SSN (688) |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | INCHES MINIMUM 1.170 AND INCHES MAXIMUM 1.175 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 1.4910 AND INCHES MAXIMUM 1.4930 |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | INCHES MINIMUM 1.170 AND INCHES MAXIMUM 1.175 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 1.120 |
| AMFR | SECOND END KEYWAY WIDTH | INCHES MINIMUM 0.3750 AND INCHES MAXIMUM 0.3770 |
| AMFT | SECOND END KEYWAY DEPTH | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.203 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 1.4910 AND INCHES MAXIMUM 1.4930 |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | INCHES NOMINAL 1.120 |
| ATPC | STEP QUANTITY | 11 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.750 |
| CSYM | SURFACE FINISH | MICROINCHES 32.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW SHAFT |
| FEAT | SPECIAL FEATURES | BOTH ENDS OF SHAFT HAVE 1.000-8 UNC-2B THREADS; BOTH ENDS OF SHAFT CHAMFERED 0.080 INCH X 45 DEGREES; FIRST END OF SHAFT HAS 1.750-4 ACME-2G X 10.500 INCH LONG LEFT HAND THREADS; SECOND END OF SHAFT HAS 1.750-4 ACME-2G X 10.500 INCH LONG RIGHT HAND THREADS; NEXT HIGHER ASSEMBLY NSN:3020-01-495-6066 |
| MATT | MATERIAL | NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-N-286,FOR-:2,CONDITION:ANNEALED&AGEHARDENED,HOTFINIS |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81348-QQ-N-286,FOR-:2,CONDITION:ANNEALED AND AGE HARDENED,FINISH:HOT FINISH |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6985420 | 53711 |
| 581-6985420-9 | 53711 |
| H611-1404 | 96169 |
| H611-1404-9 | 96169 |
| 218030137 | 96169 |