NSN 3040-01-498-1149 · NIIN 014981149 · FSC 3040
NO DASHES 3040014981149
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: INTERNAL COUNTERMEASURE LAUNCHER FOR LOS ANGELES CLASS SUBMARINE (688)
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.000 |
| AGAV | END ITEM IDENTIFICATION | INTERNAL COUNTERMEASURE LAUNCHER FOR LOS ANGELES CLASS SUBMARINE (688) |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.7370 AND INCHES MAXIMUM 0.7390 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES MINIMUM 0.560 |
| ATPC | STEP QUANTITY | 2 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.749 AND INCHES MAXIMUM 0.750 |
| CSYM | SURFACE FINISH | MICROINCHES 125.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | GUIDE |
| FEAT | SPECIAL FEATURES | FIRST SHAFT END HAS FOUR FLATS 90 DEGREE APART ON CIRCUMFERENCE, DIMENSION ACROSS FLATS 0.679 TO 0.681 INCH; 0.125 DIAMETER HOLE CENTERALLY LOCATED ON EACH FLAT (TOTAL FOUR HOLES); FIRST END HAS 0.500 DIAMETER X 0.719 DEEP AXIAL HOLE |
| MATT | MATERIAL | COPPER ALLOY 632 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST--B150 ALLOY C63200 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 595-7067876-166 | 53711 |
| 595-7067876 | 53711 |
| H692-1802-166 | 96169 |