NSN 3040-01-500-5799 · NIIN 015005799 · FSC 3040
NO DASHES 3040015005799
In Stock
COLLAR,SHAFT
Miscellaneous Power Transmission Equipment
Application: ANCHOR HANDLING DRIVE ASSEMBLY FOR NSSN CLASS SUBMARINE
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAWY | COUNTERBORE DIAMETER | ALL HOLES INCHES NOMINAL 0.781 |
| AAWZ | COUNTERBORE DEPTH | ALL HOLES INCHES NOMINAL 0.9655 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 5.880 |
| ABNM | THICKNESS | INCHES MINIMUM 2.996 AND INCHES MAXIMUM 3.002 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 3.0000 |
| AGAV | END ITEM IDENTIFICATION | ANCHOR HANDLING DRIVE ASSEMBLY FOR NSSN CLASS SUBMARINE |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AHYG | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 |
| CQJX | NOMINAL THREAD SIZE | ALL HOLES INCHES 0.500 |
| CQKB | SECURING HOLE TYPE AND LOCATION | THREADED-COUNTERBORED ALL HOLES |
| CQTP | SCREW THREAD QUANTITY PER INCH AND LOCATION | ALL HOLES 13 |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 125 |
| FEAT | SPECIAL FEATURES | COUNTER BORE HOLES ARE ON PERIMETER OF 5.880 DIAMETER AT CHORD LOCATION (NOT AT RADIAL LOCATION). SPACING OF FOUR(4) SECURING HOLES ARE 4.625 C/C HORIZONTALLY AND 1.750 C/C VERTICALLY |
| MATT | MATERIAL | NICKEL ALLOY 400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-N-281, CLASS A |
| STYL | STYLE DESIGNATOR |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 581-6985418-59 | 53711 |
| 581-6985418 | 53711 |
| H611-1402-59 | 96169 |