NSN 3040-01-504-7916 · NIIN 015047916 · FSC 3040
NO DASHES 3040015047916
In Stock
GEARSHAFT,SPUR
Miscellaneous Power Transmission Equipment
Application: VALVE,BALL,4" CLASS 700 BUTTWELD WITH GEAR OPERATOR AND STAINLESS STEEL BALL
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 6.500 |
| AGAV | END ITEM IDENTIFICATION | VALVE,BALL,4" CLASS 700 BUTTWELD WITH GEAR OPERATOR AND STAINLESS STEEL BALL |
| AJLA | TEETH QUANTITY | 20 |
| AJWS | GEAR OUTSIDE DIAMETER | INCHES MINIMUM 2.197 AND INCHES MAXIMUM 2.200 |
| ANJS | SHAFT END TYPE | CIRCULAR GROOVED, THREADED EXTERNAL |
| AQGH | DIAMETRAL PITCH | 10 |
| AQPL | FACE WIDTH | INCHES NOMINAL 1.000 |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CYEQ | SHAFT MATERIAL | STEEL COMP 1018 |
| CYER | GEAR MATERIAL | STEEL COMP 1018 |
| CYET | SHAFT LARGEST DIAMETER | INCHES MINIMUM 2.197 AND INCHES MAXIMUM 2.200 |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| CYEV | LONGER SHAFT SEGMENT LENGTH | INCHES NOMINAL 4.750 |
| CYEW | SHAFT END SIZE | INCHES 0.750 |
| FEAT | SPECIAL FEATURES | REFERENCE NAVSEA DRAWING 803-5001004. SHAFT END PROVIDED WITH TAPERED SQUARE FOR HAND WHEEL ASSEMBLY |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 803-5001004 | 53711 |
| 803-5001004-49 | 53711 |
| 803-5001004-33 AND -48 | 53711 |
| GBV-B2-40-0007-19 | 0AZ22 |
| GBV-B2-40-0007 | 0AZ22 |